2N3055 Simple inverter 5W

This simple inverter. The main aim of this circuit is to provide a suitable supply for all kind of low power battery chargers that normally connect to the mains such as mobile phones, electric shavers, etc, even an electronic neon light rated at 5W was successfully connected. Only easily obtainable components are used.


Download this schematic diagram.



Download list datasheet semiconductor parts. (PDF Format)

1. 2N3055

http://www.circuits-lab.com/

Transistorized Inverter 60W 12V DC to 230V AC

Download this schematic.




Download datasheet semiconductor component. (PDF Format)

1. BC548
2. BD140
3. 2N6107
4. 2N3055

This is low cost fully transistorised inverter circuit capable of driving medium loads of the order of 40 to 60 watts using battery of 12V, 15 Ah or higher capacity.

Transistors T1 and T2 (BC548) form a 50Hz multivibrator. For obtaining correct frequency, the values of resistors R3 and R4 may have to be changed after testing. The complementary outputs from collectors of transistors T1 and T2 are given to PNP darlington driver stages formed by transistor pairs T3-T4 and T6-T7 (utilising transistors BD140 and 2N6107). The outputs from the drivers are fed to transistors T5 and T8 (2N3055) connected for push-pull operation.

Somewhat higher wattage can be achieved by increasing the drive to 2N3055 transistors (by lowering the value of resistors R7 and R8 while increasing their wattage). Suitable heatsinks may be used for the output stage transistors. Transformer X1 is a 230V primary to 9V-0-9V, 10A secondary used in reverse.

Inverter 100W, 12V DC to 220V AC

Here is 100 Watt Inverter 12V DC to 220V AC schematic diagram.





Download this schematic diagram.




Download datasheet semiconductor component. (PDF Format)

1. CD4047
2. TIP122
3. 2N3055